Canvas has been used for centuries for protection against the harsh and unpredictable climates throughout the world. Dynaproofed™ Canvas is the preferred Australian canvas due to its uncompromising performance in one of the world’s harshest environments.
The Australian climate is a great test for canvas with its wide range of unforgiving weather conditions ranging from rugged dry desert conditions in the Outback, to high heat and humidity conditions of the Tropical North, to the wind and rain freezing territories of the Snowy Mountains and Tasmania.
The Dynaproofed™ range of canvas has been specifically developed and manufactured over many years to combat all of these climatic challenges. The following key ingredients are the components which makes Dynaproofed™ canvas the world’s best choice for a canvas fabric.
The choice of base fabric construction and quality is critical in producing a tent fabric that offers the careful balance between waterproof and breathable properties.
The durability and strength aspects of the fabric are also achieved with specific engineered specifications of the base fabrics to optimise the balance of the cloth to achieve maximum dimensional stability.
The spinning method of yarn also significantly impacts on the strength and durability of the fabric. There are 2 methods of spinning yarn – Ring Spinning and Open End.
Ring-Spun yarn is approximately 15-20% stronger than Open-End Yarn and all Dynaproofed™ fabrics are specified with Ring Spun yarn – albeit a more expensive spinning process.
Dynaproofed™ Tent Canvas fabrics are processed using the latest state of the art textile processing equipment. The fabrics are firstly processed through a continuous scouring preparation range to remove all impurities (both natural and introduced) from the weaving process of the base fabric.
These impurities include Cotton Seed, Natural Cotton Wax and Introduced Starch which is a weaving aid known as size. The preparation or ‘Pre-Proofing’ process is vital to the performance of the canvas as the impurities attract fungicide and mildew (black spot) growth.
(The finishing chemicals, and in particular Rot-Proofing chemicals are still the major protection for the fabric).
Dynaproofed™ fabrics are also produced in bulk 3,000 metre batch sizes to ensure continuity and consistency of all production stages.
The Dynaproofed™ finishing formulation utilises the world’s highest quality chemicals and incorporates Rot-Proofing, Mildew resistance, UV Resistance, Pigment Colours, Water-Proofing agents and 2 Acrylic binders in the processing formulation.
The 2 acrylic binders offer maximum UV resistance and colour stability in terms of light fastness (maximum of 7), and also combine to resist both air-born and wet-soil bacterial and fungicidal activity.
The system is based on a wax emulsion formulation that is guaranteed not to exceed 1100 mm Hydrostatic Head in order to achieve the comfort of breathability and nil condensation, but guaranteed to pass a Cone Test leakage of less than 1mL in 18 hours.
Any other fabric that has a Hydrostatic Head of 1500mm or higher is considered impervious and will more than likely condensate or sweat similar to that of PVC.
The Dynaproofed™ target is approximately 700-850mm for Hydrostatic Head which, when coupled with the one test compliance makes for the perfect canvas.
Another reason why Dynaproofed™ Canvas is the best waterproof/breathable fabric is due to the engineering technology and Proofing System. Dynaproofed™ fabrics are guaranteed to be ‘impregnated’ as opposed to ‘coated’.
An impregnated canvas, which is the standard method for all Dynaproofed™ fabrics, utilises a padding bath where the fabric is fully immersed into the proofing mix and squeezed into the intersteses of the fabric.
The process is repeated a second time to ensure thorough impregnation and coverage which allows for up to 90gsm of proofing pick-up onto the base fabric.
In contrast, a coated canvas is produced by running the base fabric under a coating blade which scrapes the chemical mix over the surface of the fabric. This process is then repeated with the reverse side being coated in a similar method.
This process seals the fabric and usually produces extremely high Hydrostatic Head results. This is actually a downside as the fabrics will have a tendancy to sweat or condensate due to poor breathability and air permeability.
The other negative factor often associated with coated canvas fabrics is tent seam leakage.
Generally speaking, the coating process over the base fabric does not allow the canvas to take-up on the punctures of needle stitching and seams which then need to go through an after sealing process.
The purchase of a Hannibal Canvas Tent is your guarantee of the best quality and protection for the elements you can find.
Get a quote.
Get the latest updates in your email box automatically.